DLA-VS2500G Professional full HD Visualization Projector • JVC U.K.

Professional full HD Visualization Projector

DLA-VS2500G

The DLA-VS2500 Visualization Series projector has been designed to produce optimal results for visualization and simulation, with 4K e-shift precision and a 5.1 megapixel projected image. Available both with (DLA-VS2500ZG) and without a lens (DLA-VS2500G), each 2K model features the BLU-Escent hybrid laser illumination system to offer improved native contrast and gamma tracking performance, together with a long lifespan.

Features

Flexible orientation - unlimited pitch & roll
11x11 matrix, 1/16 pixel micro-convergence control
Without Lens, for optional Lenses
Long-life wiregrid polarisers
Long-life inorganic optical components
Comprehensive LAN/RS232 control protocol
Long-life light source (20,000+ hours) for lower total cost of ownership
Infrared spectrum for NVG generated by the phosphor
BLU-Escent Laser/Phosphor Light source
3840 x 2160 e-shift 4K
Not for regular 4K input sources, only for dedicate Simulation IG´s
Hide function with light source minimum power
1920 x 1080 native resolution
Auto intensity mode
High contrast using D-ILA LCoS device
Angle-free installation,portrait mode available
3 active matrix 0.7" digital D-ILA devices
12-bit gamma correction
7-axis colour management system
1200 ANSI lumens (typical),1000 ANSI lumens (minimum)
30,000:1 contrast ratio (typical),20,000:1(minimum)
Digital smear reduction via black-frame insertion

Technical Specifications
Accessories
Product Support

Technical Specifications

DLA-VS2500G - Professional full HD Visualization Projector

Technical Specials

Safety and Environmental Impact
Moving from a lamp-based projector to a solid state light source means that there is no longer the mercury in the lamp to worry about, eliminating any disposal concerns.
Since the projector contains a laser source, JVC has taken special care to be sure no laser light can escape the projector housing. This is facilitated by the strong die-cast block that holds the blues lasers. This is good for thermal management and allows the projector to have a Class II laser classification. This means you follow the same safety considerations as you would with a lamp based projector.

Flexible Mounting Orientations
Compared with conventional lamp projectors with a tilt angle limitation, BLU-Escent projectors have no limitations on orientation or tilt angle. They can be installed at any orientation through 360-degrees and even vertically, which is ideal for helicopter simulators which require higher vertical resolution. The rotation of the phosphor wheel remains unaffected regardless of the install angle.

Very High Contrast and Dynamic Range
The JVC BLU-Escent projectors offer very high contrast and dynamic range. For simulators, that can be the difference between usable and unusable. For example, one key application is landing in fog or low light levels where pilots key on seeing runways or other lights to aid in landing. If the contrast is not high enough, the pilots cannot distinguish the lights from the background, making it difficult to see the landing lights in a CAT III scenario, compromising the simulation. The high dynamic range allows the lights to punch through the fog, giving a realistic, calligraphic like image.
For nighttime or night vision goggle (NVG) operations, you must have a very low black level in your projector to provide decent contrast. And, for multi-projector applications, it is critical to have the same black level across the projectors.

The BLU-Escent DLA-VS2500 offers 1920 x 1080 resolution panels, but with JVC’s e-shift technology. This technology works by having the IG create optimized 1920 x 1080 A and B sub-frames from a 3840x2160 image buffer. The subframes are projected sequentially, optically shifted ½ pixel in both horizontal and vertical directions, alternating at a rate of 120Hz for 30Hz or 60Hz content. The viewer’s eyes blend the A & B subframes together to create an enhanced resolution image. This image gives less jaggy edges, round circles and circular light points and reduces anti-aliasing.

Image Devices

Projection Technology: D-ILA

Projection Device size: 0.7 inch

Number of Projection Devices: 3

Native Resolution: 1920 by 1080 Pixels

Electronic E-Shift Generation: eshift-3

Max Resolution: 3840 by 2160 Pixels

Polarize Light Output: YES S/S/S

Light-Source

Light source technology: Laser / Posphor

Type of the Light source: Blu-Escent laser hybrid

Number of Light sources: 1 unit

Expecting Lifetime regular mode: 20000

Expecting Lifetime save mode: ~ 40000

Phosphor Wheel: YES

Light and Contrast

Brightness Typical ^[1]: 1200 ANSI Lumen

Brightness Minimum: 1000 ANSI Lumens

Contrast Typical: 30000 to 1

Contrast Minimum: 18000 to 1

Uniformity: greater than 80%

Aperture: by Lens see Lens data

Dynamic Light Power Control: YES

Manual Light Power Control: 125 steps

Infrared capability for Night Vision Googles: Yes

Color Bit depth: 10-bit Input, 10-bit Display and Signal Processing

Color Space: REC 709

Lens

Model Name: No Lens

Lens included: NO

Focus/Zoom Adjustment on internal Test Patterns: Yes

Focus/Zoom Adjustment on User Signal: Yes

Functions

Picture Mode Presets: Natural / Dynamic and 6 User settings

Color Temperature: 5500K / 6500K / 9500K / High Bright / 3 User settings

Gamma adjust: Std 2.2 Gamma and 3 User adjustable Gamma presets

Gamma Processing Depth: 12 Bit

Manual Gamma Settings: YES

E-Shift Control: ON/OFF/ Up-scaling

Color Management: 7-Axis adjustable CMS

Clear Motion Drive: OFF / Mode 1 / Mode 2 / Mode 3 / Mode 4

Pixel Adjustment Whole Screen: YES

Pixel Adjustment Zone Screen: YES

Auto Calibration: external optional Software Tool PK-CS1301 (optional cost)

Screen Mask: Off / 2.5% / 5% / Custom

Start up Logo: YES

Input Channel Hide: HDMI1 / HDM2 / Off

General Hide Mode: YES

Internal Test Patterns: YES

Standby Timer: Off / 1 Hour / 2 Hours / 3 Hours and 4 Hours

Projector System Status Screen: Yes

Local Projector Control Buttons: Yes

Menu Position select: Yes

Black/Blue Screen select (in case of no Input source): Yes

Input Signal

Input Signal Capability Special Notes:: Not for regular 4K input sources, only for dedicate Simulation IG´s, To drive the E-Shift for 4K Sources, the image generator need to create a special Odd/Even Frame format on Input A/B

HDMI Input Signal: HDMI1/HDMI2 480P/60 /576p/50/ 720p/60/50/ 1080P 50/60
DUAL Input: 1080p 50/60
PC Signal Form: 640x480

Input Level Adjustment: 16 - 235 Video (fix range) 0 to 255 PC (fix range)

Color space range for inputs: YcbCr4444 / YCbCr422 / RGB

3D Format

3D Capability: Yes

3D Special Notes:: Passive Stereo with two Projectors (Polarized Filters needed)

Image Timing Data

Latency for Simulation or Video Lip sync in ms.: 17.5ms w/1080p60 Input

Input Terminals

HDMI: Yes, 2 x HDMI v1.4b (locking HDMI connectors)

RS-232C Terminal: Yes

LAN Terminal: Yes

IR Remote: Front/Back

Control Terminals

RS-232C Terminal: Yes, RS-232C: D-Sub 9 pin (male) x1

LAN Terminal: Yes, LAN: RJ45 x1

Wired Remote in: Stereo mini jack x1

IR Remote Receivers: 2 Front/Back

Selection of IR codes: 2

Power and Environment

Noise Level (0-26 degree): <55dB (A) at 39.4”/1m (3.3ft)

Power Requirement: AC 100-240V, 50/60Hz

Power Consumption: 290 Watts

Power Standby: 5W

Operation Temperature: 5°C to 35°C

Operation Humidity:(Non-Condensing): 20% to 80%

Storage Temperature: -10°C to 60°C

Installation Height: below 2000 Meters

Installation Angle: Free angle

Dimensions: W 455 x H 179 x D 472 mm

Weight: 17 kg

Airflow requirement: 1.6 m3 per minute minimum

Motion Platform usable: Yes please contact us for Force-Data

Include Package

Cord A: US AC

Cord B: EU AC

Others: IR Controller RM-MH13G is optional,
Safety Info Doc include for Full Instruction, please download form this web site

General Editing Note

General Note:: Simulated pictures.The values for weight and dimensions are approximate.E.&O.E. Design and specifications subject to change without notice.

[1] typical @High bright mode