DT-F9L5 8.2 inch Field Monitor • JVC U.K.

8.2 inch Field Monitor

DT-F9L5

The new DT-F9L5 with LED Backlight technology and high resolution IPS panel is perfect for field usage. The DT-F9L5 uses an 8.2" IPS LED panel for best viewing performance with an increased resolution of 1280x800 pixels and the brightness boosted to 450 cd for improved HD and native SD image performance.

Features

LTC, VITC, and D-VITC time code support
Front-panel headphone jack
Vector scope, waveform, histogram, and marker functions
Zebra, focus assist functions and rear tally lamp for location monitor usage
450 cd brightness
HD SDI in x2 /out x1 (1.5G)
Built-in speakers (1W mono)
16ch audio level indicator for embedded audio
HDMI x1
CVBS(BNC) in x1, out x1
1280 x 800 Pixel IPS LED Panel - 8.2"
Robust Metal Cabinet
Mercury-free LED backlight
IMD (In Monitor Display) function based on TSL’s UMD protocol ver. 4.0
Component in x1 (Y/CVBS Share)
Weight without battery - 1.7 kg

Technical Specifications
Accessories
Product Support

Technical Specifications

DT-F9L5 - 8.2 inch Field Monitor

Panel Specifications

Panel size (diagonal in inch): 8.2

Panel resolution: 1280 X 800 Pixels

Panel Aspect Ratio: 16 to 10

Panel Type LCD: Yes

Panel Modulation IPS: Yes

Back-light LED: Yes

Brightness in cd/m²: 450

Panel Bit depth:: 8

Image Processing Bit depth: 10

Panel response times in ms: 24 ms

Viewing angle H/V: H 160 / V 160

Contrast Ratio: 800:1

IN-OUT´s Connections VIDEO

Input HDSDI: Yes, 1.5 G

Number of HDSDI Inputs: 2

Input HDMI: Yes

Number of HDMI Inputs: 1

Input YUV: Yes, 3 x BNC

Input Composite: Yes

Numbers of Composite Inputs: 1

Loop out HDSDI: Yes, 1 bridged

Loop out Composite: Yes

IN-OUT connections AUDIO

Audio Line IN: Yes, 1 RCA MONO

Audio Embedded Channel out: Yes, 2 x RCA

Headphone out: Yes, 3.5mm mini jack front

Watts: 0 X 0 Watts

IN-OUT Connections Controls

GPI IN: Yes, RJ45

RS232 IN: Yes, 9 PIN SUB D for TSL

Supported Signal Formats

Note for SMPTE/ITU Definitions: SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports

HDSDI/SD Signal Format SMPTE-292M: Yes

HDSDI/SD Signal Formats SMPTE-274M: Yes

HDSDI/SD Signal Formats SMPTE-296M: Yes

Signal Format ITU BT601-7: Yes

HDMI Format 1080P plus: up to 1080P

Composite: Yes, PAL/NTSC

Dedicate Functions

SDI Timecode: Yes, LTC,VITC and D-VITC

R/G/B/Mono: Yes

Peaking focus assist: Yes

Scan Modes: Progressive,/Field Cinema 3:2 pull down / 1:1

Safety area markers: Yes, 80% to 100%

Center Marker: Yes

Scale Markers: Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1

Area Marker Visibility: OFF,Line,Half,Half+Line

Tally via GPI: Yes

Tally Multi-Color: Yes

Low Latency Mode: Yes

Environment Power Save function: Yes

TSL UMD/IMD Support via:: Yes, RS232C

Function Keys: 1

Direct Input Channel buttons: Yes

Auto Aspect: Yes, Analogue, Digital

OPERATION KEY-LOCK: Yes

Operation LED Dimmer (Buttons): Yes

Direct Brightness/Contrast/Color control: Yes

Measurement and indication Tools

Waveform: Yes

Waveform enlargement: Yes

Vector-scope: Yes

Vector-scope enlargement: Yes

Histogram: Yes

Histogram subs: enlargement

Audio Level Meter: Yes

Audio Level Meter Channels: 16

Audio Level Meter subs: Over Level Indication

Calibration and Color settings

Preset Color Temperature 9300K: Yes

Preset Color Temperature 6500K: Yes

Preset Color Temperature USER:: Yes

Manual calibration of Color Temperature (gain or/and cut-off): Yes

Gamma Levels: 2.2/ ,2.35,/2.45,/2.6

Adjustable Back-Light: Yes

Dedicate Timing Information

Lip-sync. Processing time:: less 1 Frame

MTBF Life-Times

MTBF Notes:: MTBF Data are based on theoretical Mathematics-calculations, the values therefore are just a guess of reference life time estimation.

MTBF Panel (Back-light) :: 15000 hours

MTBF electrical:: 62123 hours

Power and Enviroment Spec´s

Power DC: Yes, 12V-17V

DC Connector Type:: 4 PIN XLR and V-Mount

Battery Type:: V-Mount

Power consumption: 1,3A DC

Operation Temperature in Celsius: 5C to 35C

Operation Humidity:(Non-Condensing): 20% to 80%

Storage Temperature in Celsius: -20C to 60C

Storage Humidity (Non-Condensing): 10% to 90%

Mechanical Informations

Weight (without stand) in Kg:: 1.7Kg

Include Package

Monitor Mount: Yes, Rack mount optional

Others: Tripod Base, Protect Filter

Instruction Doc:: Yes

General Editing Note

General Note: Simulated pictures.The values for weight and dimensions are approximate .E.&O.E. Design and specifications subject to change without notice.